gefran SIEIDrive LIFT AGy -L Instruction Manual page 229

LCD Display
I.101 Dig output 2 cfg Digital output 2 configuration
I.102 Dig output 3 cfg Digital output 3 configuration
I.103 Dig output 4 cfg Digital output 4 configuration
I.150 Exp DigOut 1 cfg Extended digital output 1 configuration
I.151 Exp DigOut 2 cfg Extended digital output 2 configuration
I.152 Exp DigOut 3 cfg Extended digital output 3 configuration
I.200 An in 1 Type Setting of the Analog Input 1 type reference (voltage)
I.201 An in 1 offset Analog Input 1 offset
I.202 An in 1 gain Analog Input 1 gain
I.203 An in 1 minimum An Input 1 minimun value
I.204 An in 1 filter Time constant of digital filter on Analog input 1
I.205 An in 1 DeadBand Analog Input 1 dead band
AGy -L
PARAMETER
DESCRIPTION
PICK LIST
LCD Selection Description
[9] Out trq>thr
[10] Current lim
[11] DC-link lim
[12] Limit active
[13] Autocapt run
[14] BU overload
[15] Neg pwrfact
[16] PID err ><
[17] PID err>thr
[18] PID err<thr
[19] PIDer><(inh)
[20] PIDerr>(inh)
[21] PIDerr<(inh)
[22] FWD enc rot
[23] REV enc rot
[24] Encoder stop
[25] Encoder run
[26] Extern fault
[27] No ext fault
[28] Serial TO
[29] freq=thr1
[30] freq!=thr1
[31] freq>thr1
[32] freq<thr1
[33] freq=thr2
[34] freq!=thr2
[35] freq>thr2
[36] freq<thr2
[37] HS temp=thr
[38] HS temp!=thr
[39] HS temp>thr
[40] HS temp<thr
[41] Output freq
[42] Out freq x 2
[43] CoastThrough
[44] EmgStop
[45] DC braking
[46] Drv OL status
[47] Drv OL warn
[48] Mot OL status
[49] Reserved
[50] Reserved
[51] Contactor Active when the RUN contactor
has to be closed, either for
upward or downward motion
[52] Contactor UP Active when the RUN contactor
has to be closed for upward
motion
[53] Contactor DW Active when the RUN contactor
has to be closed for downward
motion
[54] Brake cont Active when the mechanical
brake has to be released
[55] Lift start Active when the inverter output
bridge is enabled and DC brake
is not in progress
As for I.100
As for I.100
As for I.100
As for I.100
As for I.100
As for I.100
[0] +/- 10V Bipolar ± 10V
Unipolar +10V
[1] 0-10V/0-20mA
32 0 55
54 0 55
2 0 55
52 0 55
53 0 55
0 0 55
1 0 1
0 -99.9 99.9 % 0.1
1 -9.99 9.99 % 0.01
0 0 99.99 % 0.1
0.1 0.001 0.25 sec 0.001
0 0 99.9 % 0.01
IPA
113
114
115
116
117
180
118
119
120
121
122
182
229