4.2.7.2
Digital outputs OUT1, OUT2
The motor starter is equipped with two digital outputs that you can connect direct to an
actuator.
The outputs can be loaded to max. 0.5 A and protected electronically against short circuits.
A connector (M12, 4 or 5 pin) is used for establishing the connection. The motor starter is
equipped with a range of sockets.
Example: Connecting the digital output
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
Mounting / connection
4.2 Connection
111