Diagnostics With Step 7 On Profinet Io - Siemens SIRIUS M200D Manual

7.5

Diagnostics with STEP 7 on PROFINET IO

Additional information regarding the data records for PROFINET IO
The structure of the diagnostic data records and examples for programming can be found in
the From PROFIBUS DP to PROFINET IO programming manual.
(http://support.automation.siemens.com/WW/view/en/19289930)
Reading out the diagnostic data
Options for reading diagnostics data
Automation system
with I/O controller
SIMATIC S7
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
Blocks or registers in Application
STEP 7
e.g. in HW Config by Device diagnostics data
selecting "Station" > in plain text on the STEP
"Open online" 7 user interface (in the
Quick View, Diagnostics
View, or Module Status
windows)
SFB 52 Reading data sets from
"RDREC" the I/O device
SFB 54 Receiving interrupts from
"RALRM" the I/O device
7.5 Diagnostics with STEP 7 on PROFINET IO
Reference
"Hardware diagnostics"
in the STEP 7 Online Help
SFB, refer to the STEP 7
Online Help (System
functions/Function blocks)
SFB, refer to the STEP 7
Online Help (System
functions/Function blocks)
Diagnostics
165