Siemens SIRIUS M200D Manual page 149

Statistical data (DS 95)
The following data is stored in data set 95 (Page 206) of the starter:
● Operating hours device
● Operating hours motor
● Operating hours motor current= 18 to 49.9% of I
● Operating hours motor current= 50 to 89.9 % of I
● Operating hours motor current= 90 to 119.9 % of I
● Operating hours motor current= 120 to 1000 % of I
● Number of starts motor CW
● Number of starts motor CCW (RSte/sRSSte only)
● Number of motor overload trips
● Number of switching element overload trips
● Number of starts output 1
● Number of starts output 2
● Number of stops with mechanical braking
● Number of short-circuit trips
● Last tripping current I
● Last tripping current I
● Motor current I
● Motor current I
● Number of starts output BO
● Maintenance timer
For all motor starters with brake output
1)
On M200D PROFIBUS/PROFINET motor starters, the operating hours are saved in the
event of power failure (a maximum of 6 minutes can be lost). Statistical data can be read out
via "Motor Starter ES" or the PLC with SFC59 or SFB 53.
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
(%)
A
(eff)
A
(%)
max
(rms)
max
1)
7.3 Diagnostics via data sets
e max
e max
e max
e max
1)
Diagnostics
149