Profienergy (Version V1.0) In The M200D Profinet Motor Starter - Siemens SIRIUS M200D Manual

3.21.2

PROFIenergy (version V1.0) in the M200D PROFINET motor starter

The M200D PROFINET motor starter supports the "PE_Energy_saving_function" and
"PE_Measured_value_function" for the motor current. These are identified as commands,
since they trigger reactions in the M200D motor starter.
In addition, the M200D motor starter also provides so-called services, which provide
information on the status of the motor starter as defined in PROFenergy. These can then be
evaluated and further processed in the user program.
Commands
The following commands are supported:
Control commands
Start_Pause
End_Pause
Status commands
PE_Identify
PEM_Status
Query_Modes
List_Energy_Saving_Modes
Get_Mode
Query_Measurement
Get_Measurement_List
Get_Measurement_Values
The M200D motor starter distinguishes between two different statuses for data transmission:
PE_Mode_ID = 255
PE_Mode_ID = 01
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
The starter switches to energy-saving mode.
The starter switches back to operating mode.
Provides a list of supported PROFIenergy commands/functions.
Shows the status of the current PE mode.
Provides a list of supported energy-saving modes.
Provides the parameter values with which the
PE_Energy_saving_function works.
Provides a list of supported PE_Measured_values
Shows the supported PE_Measured_values
Ready to operate
Energy-saving mode
Functions
3.21 PROFIenergy
85