Functions
3.3 Basic functions / parameters
3.3.4
Response to switching element supply voltage cut-off
With this parameter, you determine which message the motor starter is to output if the
supply voltage of the switching elements fails.
Note
Supply voltage of the switching elements
The supply voltage of the switching elements (24 V) must be applied via the auxiliary voltage
connections (7/8").
Settings
Response to switching element supply
voltage cut-off
30
Device parameter
Default setting
Group fault
Manual, 08/2014, A5E01577426A/RS-AA/004
Setting range
Group fault
•
Group fault only after ON
•
command
Group warning
•
M200D PROFIBUS/PROFINET