Topology Example: Drives In V/F Control (Vector Control) - Siemens SINAMICS S120 Function Manual

Appendix
A.3 Supported sample topologies
A.3.5

Topology example: Drives in V/f control (vector control)

The following diagram shows the maximum number of controllable vector V/f drives with
additional components. The sampling times of individual system components are:
● Active Line Module: p0115[0] = 250 µs
● Motor Modules: p0115[0] = 500 µs
● Terminal Module/Terminal Board p4099 = 2 ms
Figure A-7
1052
Topology example of a vector drive line-up in V/f control
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Drive functions