Milling Unit Set Up; Milling Guide Set Up - Horizon Fitness Perfect Binder BQ-260 Manual

4-3 Milling Unit Set Up

NOTE
When milling is not required on your bind-
ing, milling unit set up is not necessary to
perform.
Select without milling mode and proceed to
"4-4 Cover Feeder Unit Set Up" (Page 29).

4-3-1 Milling Guide Set Up

This section shows how to adjust milling
guide position.
1.
Depress emergency stop switch.
2.
Loosen two lock knobs on front milling
guide.
3.
Hold holder on stock thickness caliper
and open stock thickness caliper more than
stock thickness.
4.
Place stock in stock thickness caliper.
NOTE
Use stock which will be bound.
5.
Hold holder on stock thickness caliper
and push it to stock so that caliper guides
hold stock.
6.
Fasten two lock knobs on front milling
guide firmly.
7.
Take out stock from stock thickness
caliper.
Safety Cover
Stop Button
Stock
Holder
Lock Knobs
Stock Thickness Caliper
27
4. Set Up BQ-260
Lock Knobs
Milling Guide