2.4 Pin Mapping - Intel Quark SE Series Platform Manual

System Assumptions
 1x SPI Slave Interface with support for SPI clock frequencies up to 3.2 MHz
 2x UART Interfaces supporting baud rates from 300 to 2M
 19 ADC/Comparator Inputs

4x PWM Signals
 32 GPIOs
 Real-time Clock
 Watchdog Timer
 Brownout protection
The
Intel® Quark™ SE microcontroller C1000
 Intel® Quark™ SE microcontroller C1000 main expansion options:

 Intel® Quark™ SE microcontroller C1000 on-board components:


 Other Intel® Quark™ SE microcontroller C1000 connectors:

The power sources for this platform are as follows:
 External 5V DC input
 Li-ion battery (external)
 USB power (5V) via debug port

2.4 Pin Mapping

The Intel® Quark™ SE microcontroller C1000 has multiple functional modes, and the
interfaces and ball mapping are described below. Please refer to guides for BIOS
writers to familiarize yourself with the detailed firmware requirements for setting
the particular functions.
June 2017
Document Number: 334715-004EN
"Arduino Uno" like SIL sockets (1.8V and 3.3V IO)
Accelerometer, Gyroscope and Temperature sensors
UART/JTAG to USB convert for USB debug port
2x USB 1.1 Device Port – micro Type B
CRB has the following features:
Intel® Quark™ SE Microcontroller C1000
Platform Design Guide
15