Ricoh Beluga-C1 Training page 117

Original and Paper Feed Paths
Front Copy
Exit
Bypass Feed
Slide 117
Original Feed Paths
There are two exits: upper, and rear.
An optional original exit table can be installed behind the machine to catch
originals coming out of the machine.
Thick paper must go to the rear original exit, to prevent image jitter during
scanning.
Copy Feed Paths
There are three routes into the machine: Roll tray 1, roll tray 2 (optional unit), or
the bypass table
The bypass table is used when the customer wishes to make a copy on a sheet
of cut paper.
Note that there are two exits: front, and rear.
The rear exit has a long document catcher below it.
117
Beluga-C1/C1.5 Training
Upper
Original Exit
Rear
Original Exit
Rear Copy
Exit