Ricoh Beluga-C1 Training page 51

Place
Making the Machine Level
Levels Here
Slide 51
Emphasize the note - if longer than 2 mm is left sticking above the bottom plate,
you cannot pull out or slide in the optional 3
If the machine is not level from left to right, developer will not be distributed
evenly across the development unit.
Not more than 2
mm
51
Beluga-C1/C1.5 Training
Check at two places, as
explained in the manual.
On the development
unit
On the exposure glass
The end of the bolt must
not stick out by more
than 2 mm
Adjust here
(Four
Corners)
rd th
/4 roll feeder.