Ricoh Beluga-C1 Training page 111

Update Procedures - Copier
Use SD cards for this machine.
All the firmware can fit on one SD card.
Make a 'romdata' folder on the SD card, and
store the firmware here.
Put the SD card with the new firmware in SD card
slot 2.
Follow the procedure in the service manual.
Select the modules that you want to update.
You cannot update operation panel firmware at
the same time as controller firmware.
Do not switch off the machine power during a
firmware update.
Slide 111
SP 7801: This shows the firmware versions.
If the update procedure fails, you must replace the controller board.
Service manual, System Maintenance Reference, Firmware
111
Beluga-C1/C1.5 Training
Update