Ricoh Beluga-C1 Training page 61

Inputting Developer Lot Numbers
Do SP2801-2 and 3 to enter the lot numbers.
You must do this before you try to initialize the
developer.
Slide 61
No additional notes
Use the soft keyboard on the display panel to
enter the lot numbers.
The lot numbers are embossed on the top edge
of each developer pack.
If the numbers are the same, enter the same
number twice.
If you try to initialize the developer first, an error
message is displayed, and you must enter the lot
numbers before the machine can initialize the
developer.
61
Beluga-C1/C1.5 Training