Ricoh Beluga-C1 Training page 237

Slide 237
The solenoid directs the paper to either the front or rear copy exit.
The user selects the required exit for the job at the operation panel.
The procedure for the user to switch between the exits was shown in the
Machine Overview section of the course.
For recommendations on which exit to use, see the Operating Instructions.
The user must be careful to select the rear cover for A1 (D) LEF or longer paper.
The front exit tray cannot support larger sizes.
The machine does not automatically switch exits if the paper is A1 (D) LEF
or longer.
Switching the Exits
Copy Reference – Placing Originals – Original and Copy
237
Beluga-C1/C1.5 Training
Paper junction
gate solenoid:
Directs paper to
the selected exit
Selected at the
operation panel
Solenoid on:
Rear exit
There is no copy
exit selection
lever for the user
to operate.
Output Locations