Ricoh Beluga-C1 Training page 68

First, install paper rolls.
After installing each roll, press the Auto Feed
button for that roll on the roll tray frame.
Slide 68
No additional notes
Making Test Copies
This should be explained in the operation manual
and on decals attached to the machine.
The roll feeds a short length of paper, and cuts it.
then it reverses so that the leading edge is out of
the paper feed path; this is because rolls 1 and 2
both use the same paper feed path. The roll is
now initialized.
68
Beluga-C1/C1.5 Training