Ricoh Beluga-C1 Training page 53

Adding the First Bag of Developer
Remove this
sheet
Add one bag of developer at this time. Do not add the second
bag.
Slowly add the developer from the first pack into the development unit.
Move the pack from left to right until the pack is empty.
An equal amount of developer must be spread along the entire open
slot of the development unit.
Keep the empty bag – you will need the lot number later.
Slide 53
Each bag contains 1 kg of developer.
The developer is the same as the Neptune-C2.
Earlier models had a knob which must be turned to distribute developer. In this
machine there is no knob. The machine distributes the developer automatically
after you turn the power on for the first time. This is explained on the next slide.
53
Beluga-C1/C1.5 Training
Lot
Number
Then add
developer