Ricoh Beluga-C1 Training page 32

Electronic Counters: Two Types
There are two types
What is the purpose of the area counter?
The area counter operates differently for the bypass tray
Slide 32
No additional notes
Length counter (measured in m, ft, or yards)
Area counter (measured in m
from the paper width and the cut length
An output that is 594 x 841 mm LEF adds more to the length
counter than the same image on 841 x 594 SEF.
Because of this, customers who print images in the SEF
orientation will get more prints from their service contracts.
The area is calculated from the original length and original
width, and the magnification ratio that was used.
This is because there is no paper width and length detection
for the bypass tray.
2 2 2
, ft , or yards ): Calculated
32
Beluga-C1/C1.5 Training