Ricoh Beluga-C1 Training page 35

Previously stored files on the SD card can be
overwritten or left intact.
After you enable this function with the printer bit
switch, the following two user tools are added to
the List/Test Print tab of the Printer Features user
tools menu.
Card Save (Add):
» Appends files to the SD Card.
» Does not overwrite existing files.
» If the card becomes full or if all file names are used, an
error will be displayed on the operation panel.
Subsequent jobs will not be stored.
Card Save (New)
» Overwrite files in the card's /prt/cardsave directory.
Slide 35
Study the procedure in the service manual.
Note that there is no message on the screen to indicate that a file was copied to
the SD card successfully. But there are some error messages that appear if
things go wrong.
If an error occurs, press "OK". The device will discard the job and return to the
ready state.
Card Save (2)
Service Manual - System Maintenance Reference - Card
35
Beluga-C1/C1.5 Training
Save Function