Ricoh Beluga-C1 Training page 193

User Tools for Paper Size and Type
Paper type and width affect toner supply and fusing
temperature/pressure, so the correct settings should be made.
Paper Size
System Settings - Tray Paper Settings - Tray Paper Size
Paper Type
System Settings - Tray Paper Settings - Paper Type
System Settings - Tray Paper Settings - Paper Thickness
Amount of Remaining Paper
System Settings - Tray Paper Settings - Paper Volume
Paper Size
Slide 193
Note the user tools that must be used for paper type and other roll-related
displays on the operation panel.
Note how the settings affect the display panel.
Paper type and width affect toner supply and fusing temperature/pressure,
so the correct settings should be made.
Paper type
Rolls 1 to 3: Plain, Translucent (tracing paper), Film, Recycled
Bypass: Plain, Translucent (tracing paper), Film
The paper type is not displayed in the machine's default state. If you
change the user tool (Tray Paper Settings – Paper Type), you can see the
paper type.
Paper thickness: For each paper type, there is a default thickness. You can
change this setting with a user tool (Tray Paper Settings – Paper
Thickness).
Remaining Paper: The user has to select a remaining paper icon with another
user tool (Paper Volume). The machine then automatically counts down the
amount of remaining paper, and changes the icon automatically. There are only
four possible icons to display the amount of remaining paper, so it is only a rough
indication. This is only for the user's reference; the user tool setting does not
affect how the machine works.
There is roll end detection. This will be explained later.
Amount
Remaining
General Settings Guide – System Settings – Tray Paper
193
Beluga-C1/C1.5 Training
Settings