Ricoh Beluga-C1 Training page 91

Moving Applications to Another Card
Put the Source SD card in Slot 2.
Put the Target SD card in Slot 1.
Turn the copier on.
Do SP5873-1.
Follow the instructions on the display and touch "Execute"
to start copying.
When the display tells you copying is completed, touch
"Exit". Then turn the copier off.
Remove the Source SD card from Slot 2, and leave the
target SD card in Slot 1.
Turn the copier on.
Check that all the applications on the SD card in Slot 1 are
enabled.
User Tools> System Settings> Administrator Tools> Next>
Firmware Version> Next (3/4)
Slide 91
Service Manual, Installation, MFP Options, Before You
Begin, Moving Applications onto one SD Card
91
Beluga-C1/C1.5 Training