Ricoh Beluga-C1 Training page 92

Store the Card after Moving
After you move an application off an SD card,
store the copied SD card at the customer site.
There is no special storage location inside the
machine.
The SD card must be stored with the machine for
these reasons:
After an SD card has been copied, it can no
longer be used. But it must be stored at the
customer site to serve as proof of purchase by
the customer.
Also, at a later time the stored SD cards can be
restored to full use with SP5873-2 (see the 'Undo
Exec' procedure in the manual).
Before storing the SD card at the customer site,
label it so that it can be easily identified.
Slide 92
When you use the 'Undo Exec' procedure, the SD card in Slot 1 must be the
original SD card of the application you want to move from Slot 2 to Slot 1. You
cannot use any blank SD card in Slot 1. The application can be moved only to
the original SD card.
92
Beluga-C1/C1.5 Training