Ricoh Beluga-C1 Training page 88

Ethernet
USB-B
1
2
B
Slide 88
USB B: Built-in for connection of USB devices.
NOTE: USB is built-in, but it must be enabled with SP5985.
Ethernet: Standard LAN connection point for network; must be enabled with
SP5985.
The gigabit Ethernet slot is also used for the Ratio controller (RW-7140). The
installation kit will have a 5m cable.
Board Slots
Slot A: IEEE1284
Slot B: IEEE802.11a/g
Slot C: Either:
C
File Format Converter:
Installed at the factory
A
88
Gigabit Ethernet
Interface PCB for Ratio
controller
Beluga-C1/C1.5 Training