Ricoh Beluga-C1 Training page 24

Slide 24
Operating Instructions - About the Machine – Getting Started
The diagram shows the upper tray.
1. Anti-humidity heater switch
When humidity is high, paper in the paper tray may absorb moisture, which
can affect copy quality. The anti-humidity heater prevents this.
Turn this switch on when humidity is high.
2. Paper holder
The two paper holders grip the paper roll and are mounted on the paper roll
tray's roll holder.
3. Paper feed knob
Use when loading paper rolls or clearing paper jams.
4. Cutter knob
Use to manually cut paper if there are paper jams in the cutter area of the
machine. Always return the cutter knob to the left or right end.
5. Auto feed button
The switch allows the user to feed the leading edge of a new roll into the
machine properly. Press the key to feed paper, then release to cut the
paper.
Use this to clear misfeeds in the paper feed area. Keep this button pressed
to feed the roll paper continuously.
When approximately 100 mm (3.9") of paper length is fed, release the
button so that paper will be cut automatically.
6. Roll holder
Adjust this to the size of the paper roll you are using. The anti-humidity
heaters are not options in this machine. The switches are off by default, to
meet Energy Star requirements.
Roll Tray
24
Beluga-C1/C1.5 Training