Ricoh Beluga-C1 Training page 97

IEEE802.11 Options – Antenna Cables (3)
Antennas
Ventilation
Clamps
Slide 97
No additional notes
Attach the antenna that has
the black core on its cable to
the front pad.
Attach the antenna that has
the white core on its cable to
the rear pad.
The antenna with the black
core transmits and
receives. It must be
installed at the front.
The antenna with the white
core only receives. It must
be installed at the rear.
Clamp the cables at 15 cm
and 5 cm intervals as shown
here.
Make sure that the cables are
not over the ventilation port.
Make sure that the cables are
not crossed.
97
Beluga-C1/C1.5 Training