Ricoh Beluga-C1 Training page 33

Electronic Counters: How to Select?
SP 5045 002: Selects the unit for the counter (m,
ft, yards, m
You can change the unit at any time.
Slide 33
In other machines, you cannot change the unit after you install the machine,
because the machine cannot remember the history of changes for the unit.
For example, we start with meters, and print 5 meters. Then we change to feet,
and print 6 feet. The total is 5 + 6 feet = 11 feet, which is not correct.
But with this model (same as D-C2), there is a basic counter in the software that
counts in mm or mm
unit, the value in the basic counter stays the same. So, you can change the unit
any time.
2 2 2
, ft , or yards )
2
, and converts this to the required unit. If you change the
33
Beluga-C1/C1.5 Training