Ricoh Beluga-C1 Training page 229

Fusing Unit Entrance Guide
Cannot be adjusted without removing the fusing unit.
Slide 229
There are three adjustment levers at the center of the fusing unit entrance.
The levers can be moved left and right to adjust the height of the entrance guide
plate.
Adjust only when the paper thickness is causing a severe problem at the fusing
entrance.
The adjustment cannot be made without removing the fusing unit, so it was
not mentioned in the service manual, and should not be attempted unless
there is a serious problem.
229
Beluga-C1/C1.5 Training