Ricoh Beluga-C1 Training page 129

This is a two-disk unit. All disks must be replaced at the
same time. Do not try to replace one disk only.
Before you install a new unit:
A decal shows you how to connect up the new hard disk
unit.
After you install a new unit:
Slide 129
No additional notes
Hard Disk Removal (3)
Do SP 5846 051 to copy the address book from the hard
disk to an SD card (put the SD card in slot 1).
Do SP5853 001 to download the fixed stamps from the ROM
to the HDD.
Switch the machine off and on to enable the fixed stamps for
use.
Do SP 5846 052 to download the address book from the SD
card to the hard disk (put the SD card in slot 1).
129
Beluga-C1/C1.5 Training