Revision History - Xilinx Virtex-7 VC7203 User Manual

DISCLAIMER
The information disclosed to you hereunder (the "Materials") is provided solely for the selection and use of Xilinx products. To the maximum
extent permitted by applicable law: (1) Materials are made available "AS IS" and with all faults, Xilinx hereby DISCLAIMS ALL
WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether
in contract or tort, including negligence, or under any other theory of liability) for any loss or damage of any kind or nature related to, arising
under, or in connection with, the Materials (including your use of the Materials), including for any direct, indirect, special, incidental, or
consequential loss or damage (including loss of data, profits, goodwill, or any type of loss or damage suffered as a result of any action
brought by a third party) even if such damage or loss was reasonably foreseeable or Xilinx had been advised of the possibility of the same.
Xilinx assumes no obligation to correct any errors contained in the Materials or to notify you of updates to the Materials or to product
specifications. You may not reproduce, modify, distribute, or publicly display the Materials without prior written consent. Certain products are
subject to the terms and conditions of Xilinx's limited warranty, please refer to Xilinx's Terms of Sale which can be viewed at
www.xilinx.com/legal.htm#tos; IP cores may be subject to warranty and support terms contained in a license issued to you by Xilinx. Xilinx
products are not designed or intended to be fail-safe or for use in any application requiring fail-safe performance; you assume sole risk and
liability for use of Xilinx products in such critical applications, please refer to Xilinx's Terms of Sale which can be viewed at
www.xilinx.com/legal.htm#tos.
© Copyright 2012–2014 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated brands
included herein are trademarks of Xilinx in the United States and other countries. All other trademarks are the property of their respective
owners.

Revision History

The following table shows the revision history for this document.
Date Version
10/10/2012 1.0
07/30/2013 1.1
12/18/2013 1.2
10/17/2014 1.3
VC7203 GTX Transceiver Characterization Board
Initial Xilinx release.
Revised Table 1-16. Replaced the Master UCF listing with the Master XDC listing in
Appendix C, Master Constraints File
Revised Table 1-7 through
XC7V485T-3 FFG1761E to XC7VX485T-3 FFG1761E and XC7V485T to XC7VX485T. Pair
numbers changed in FPGA Mezzanine Card HPC Interface, page
Figure 1-10. Changed title of
references in Appendix D, Additional
Conformity link in Appendix E, Regulatory and Compliance
In FPGA Compatibility, page
document" was removed. The number of GTX transceiver power modules supplied
with the VC7203 board changed from four to three in
Module, page 13. The VC7203 Board XDC Listing
websites changed in References, page
was added.
www.xilinx.com
Revision
Listing. Updated links.
Table 1-12 and Table 1-17. Changed device number from
Appendix C to Master Constraints File
Resources. Updated the Declaration of
5, "Unsupported interfaces are highlighted in this
changed. The module vendor
73, Bellnix was removed, and General Electric
30. Revised
Listing. Updated
Information.
7 Series GTX Transceiver Power
UG957 (v1.3) October 17, 2014