Figure 11
1. Bed support
9.
Push the bed support onto the cylinder rod,
making sure that the support end tabs rest on
the end of cylinder barrel and on the cylinder rod
end
(Figure
12).
Figure 12
1. Bed support
2. Lift cylinder
g002397
g009164
3. Skid frame
5
Assembling the Drain Valve
No Parts Required
Procedure
1.
Remove the cable tie that secures the drain
valve and hose for the sprayer tank to the skid
channel
(Figure
1. Drain valve
2. Cable tie
2.
Move the drain valve and hose outboard of the
skid channel
(Figure
20
13).
Figure 13
3. Skid channel
14A).
g213728