Toro Multi Pro WM Operator's Manual page 83

Installing the Rate Control
Manifold Valve
1. Align a gasket between the flanges of the rate
control valve manifold and the pressure filter
head (Figure 123A).
Note:
If needed, loosen the mounting hardware
for the pressure filter head as needed to provide
clearance.
Figure 123
1. Locknut (1/4 5. Gasket
inch)
2. Valve mount 6. Flange clamp
3. Flange 7. Flange
(agitation-valve)
4. Flanged-head 8. Flange (rate
bolt (1/4 x 3/4
inch)
2. Assemble the rate control valve manifold,
gasket, and pressure filter head with a flange
clamp and tighten by hand
3. Align a gasket between the flanges of the rate
control valve and the agitation-valve manifold
(Figure 123A).
9. Coupling
(manifold-valve)
10. Socket (outlet
fitting)
11. Retainer
(pressure filter
head)
control valve)
(Figure 123A).
4. Assemble the rate control valve manifold,
gasket, and agitation-valve manifold with a
flange clamp and tighten by hand
5. Assemble the rate control valve to the valve
mount with the 2 flanged-head bolts and 2
flanged locknuts
in step 3 of
Valve (page 77)
10 to 12 N∙m (90 to 110 in-lb).
6. Assemble the outlet fitting onto the coupling
fitting at the bottom of the manifold for the rate
control valve
7. Secure the outlet fitting coupling fitting by
inserting a retainer into the socket of the outlet
fitting (Figure
8. If you loosened the mounting hardware for the
pressure filter head, tighten the nut and bolt to
10 to 12 N∙m (90 to 110 in-lb).
Installing the Agitation Manifold
Valve
1. Align the flange of the agitation-valve manifold,
a gasket, and the flange of the agitation bypass
valve (Figure
Note:
If needed, loosen the mounting hardware
for the master-boom valve as needed to provide
clearance.
g028538
1. Flanged-head bolt (1/4 x
3/4 inch)
2. Gasket
3. Manifold (agitation valve)
4. Flanged locknut (1/4 inch)
83
(Figure
(Figure 123A) that you removed
Removing the Rate Control Manifold
and torque the nut and bolt to
(Figure 123B).
123B).
124).
Figure 124
5. Flange clamp
6. Valve mount
7. 3-pin connector (valve
actuator—agitation valve)
123A).
g033604