Safety And Instructional Decals - Toro Multi Pro WM Operator's Manual

and attachments. If the tank must be in the raised
position, secure it with the safety support.
•
To make sure that the entire machine is in good
condition, keep all nuts, bolts, and screws properly
tightened.
•
To reduce potential fire hazard, keep the engine
area free of excessive grease, grass, leaves and
accumulation of dirt.
•
If the engine must be running to perform a
maintenance adjustment, keep hands, feet,
clothing, and any parts of the body away from the
engine and any moving parts. Keep everyone
away.
•
Do not overspeed the engine by changing the
governor settings. The maximum engine speed is

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Automatic—closed
loop-rate control
1. Warning—read the Operator's Manual; use fresh, clean
water for first-aid washing.
131-5808
2. Manual—open loop-rate
control
120–0616
3,650 rpm. To assure safety and accuracy, have
an Authorized Toro Distributor check the maximum
engine speed with a tachometer.
•
If major repairs are ever needed or assistance is
required, contact an Authorized Toro Distributor.
•
To ensure optimum performance and continued
safety certification of the machine, use only
genuine Toro replacement parts and accessories.
Replacement parts and accessories made by
other manufacturers could be dangerous, and
such use could void the product warranty.
•
Refer to your Workman machine Operator's
Manual for additional maintenance information.
decal131-5808
1. Warning—read the
Operator's Manual.
2. Warning—do not enter the
sprayer tank.
decal120-0616
9
120–0622
3. Chemical burn hazard;
toxic gas inhalation
hazard—wear hand and
skin protection; wear eye
and respiratory protection.
decal120-0622