Toro Multi Pro WM Operator's Manual page 81

Figure 118
1. Bypass fitting
Cleaning the Manifold Valve
1. Position the valve stem so that it is in the closed
position (Figure 119B).
Figure 119
1. Valve open
2. Remove the 2 end-cap-fitting assemblies from
each end of the manifold body
Figure 121).
g028239
2. Section valve manifold
g027562
2. Valve closed
(Figure 120 and
Agitation Valve Manifold
1. Stem retainer
2. Valve stem
3. Stem port
4. Stem-capture retainer
5. End-cap fitting
6. End-cap seal O-ring
(0.796 x 0.139 inch)
81
Figure 120
7. Back seating O-ring (0.676
x 0.07 inch)
8. Valve-seat ring
9. Manifold body
10. Ball valve
11. End-cap-fitting assembly
g028243