Maintenance; Recommended Maintenance Schedule(S) - Toro Multi Pro WM Operator's Manual

Maintenance

Note:
Download a free copy of the electrical or hydraulic schematic by visiting www.Exmark.com and searching
for your machine from the Manuals link on the home page.
Note:
Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
Before each use or daily
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Yearly
Important:
Refer to the Operator's Manual for your machine and the engine owner's manual for
additional maintenance procedures.
Maintenance Procedure
• Clean the suction filter.
• Clean the pressure filter.
• Check the tank straps.
• Lubricate the pump.
• Lubricate the grease fittings.
• Lubricate the boom hinges.
• Inspect all hoses and connections for damage and proper attachment.
• Clean the flow meter (more often when using wettable powders).
• Inspect the O-rings in the valve assemblies and replace them if necessary.
• Change the suction filter.
• Change the pressure filter.
• Inspect the pump diaphragm and replace if necessary.
• Inspect the pump check valves and replace if necessary.
• Inspect the nylon pivot bushings.
• Flush the sprayer with clean water.
• Calibrate the agitation bypass valve.
67