Toro Multi Pro WM Operator's Manual page 80

Removing the Section Manifold
Valve
1. Remove clamps and gaskets that secure the
manifold for the section valve
adjacent section valve (if left section valve, and
the reducer coupling).
Figure 116
1. Flange (reducer coupling)
2. Manifold (section valve)
3. Flange (adjacent section
valve)
2. Remove the retainers that secure the outlet
fitting to the section valve manifold and the valve
manifold to the bypass fitting
(Figure 116) to the
g028236
4. Gasket
5. Flange clamp
(Figure 117).
1. Retainer
2. Socket (bypass fitting)
3. For the left or right boom section valves, remove
the flanged-head bolts and flanged locknuts that
secure the section valve(s) to the valve mount
and remove the valve manifold(s) from the
machine; for the center section valve, remove
the section valve manifold from the machine
(Figure 118).
80
Figure 117
3. Socket (outlet fitting)
4. Manifold valve assembly
g028238