Toro Multi Pro WM Operator's Manual page 51

Note:
Holding the button down increases the
value of the tank alert by 10%.
5. Press the left selection button to save and return
to the main menu
Entering the PIN into the InfoCenter
Note:
Entering the PIN allows you to change the
access protected settings and maintain the password.
Note:
The factory entered PIN number is 1234.
1. From the Main Menu, press the center selection
button to navigate to the Settings menu.
2. Press the center selection button to highlight the
Protected Menus setting.
3. Press the right select button to select Protected
Menus (Figure 71A).
4. Set the numerical value in the PIN entry screen
by pressing the following selection buttons:
•
Press the center selection button
71B) to increase the numerical value (0 to 9)
•
Press the right selection button
to move the cursor to the next numerical
position to the right.
5. Once the right-most value is set, press the right
selection button.
Note:
The check mark icon appears above the
center selection button
6. Press the center selection button
to enter the password.
Figure 71
(Figure
(Figure
(Figure 71D).
(Figure
Changing the PIN
1. Enter the current PIN; refer to steps
6 in Entering the PIN into the InfoCenter (page
51).
2. From the Main Menu, press the center selection
button to navigate to the Settings menu.
3. Press the center selection button to highlight the
Protected Menus setting.
4. Press the right select button to select Protected
Menus
g028522 5. Enter the new PIN into the entry screen by
pressing the following selection buttons:
•
Press the center selection button
72A) to increase the numerical value (0 to 9)
•
Press the right selection button
to move the cursor to the next numerical
position to the right.
6. Once the right-most value is set, press the right
selection button.
71C)
Note:
selection button
7. Wait until the InfoCenter displays the "value
saved message" and the red indicator light
illuminates.
71D)
51
Figure 72
(Figure 72A).
The Save icon appears above the center
(Figure 72D).
1 through
g028717
(Figure
(Figure 72C)