“Logging” (For Ccu-Equipped Models); “Maintenance”; “Unit” - Yamaha R1 Series 2015 Service Manual

Table of Contents

"Logging" (for CCU-equipped models)

Vehicle and riding information can be recorded

(logged) and this data can be accessed with a

smart device. (Refer to "CONNECTING TO THE

CCU (for YZF-R1M)" on page 4-5.)

[To start and stop logging]

1. From the MENU screen, select "Logging".

If a CCU is not installed or the CCU is not prop-

erly connected, then the "Logging" module can-

not be selected.

2. Select START to start logging.

1. Logging indicator

3. To stop the "Logging" function, select STOP

or turn the vehicle off.

"Maintenance"

This function allows you to record distance trav-

eled between engine oil changes (use the OIL

item), and for two other items of your choice (use

INTERVAL 1 and INTERVAL 2).

[To reset a maintenance item]

1. From the MENU screen, select "Mainte-

2. Select the item you want to reset.

3. Long push the wheel switch to reset the item.

Maintenance item names cannot be changed.

This module allows you to set the fuel consump-

tion units, and for certain markets, the display

can be switched between kilometers and miles.

When using kilometers, the fuel consumption

units can be changed between km/L or

L/100km. When using miles, MPG will be avail-

[To set the distance or fuel consumption

1. From the MENU screen, select "Unit".

Troubleshooting