Installing The Air Filter Case Cover; Installing The Fuel Hose (Primary Injector Joint Side And Secondary Injector Joint Side) - Yamaha R1 Series 2015 Service Manual

2
1
5. Check the injector pressure after the injectors
are installed.
Refer to "CHECKING THE INJECTOR
PRESSURE" on page 7-14.
EAS31731

INSTALLING THE AIR FILTER CASE COVER

1. Install:
• Air filter case cover "1"
Air filter case cover screw
2.0 Nm (0.20 m·kgf, 1.4 ft·lbf)
1
EAS30468
INSTALLING THE FUEL HOSE (PRIMARY
INJECTOR JOINT SIDE AND SECONDARY
INJECTOR JOINT SIDE)
1. Connect:
• Fuel hose (primary injector joint side and sec-
ondary injector joint side)
ECA17500
NOTICE
When installing the fuel hose, make sure that
it is securely connected, and that the fuel
3
2
1
hose connector cover on the fuel hose is in
the correct position, otherwise the fuel hose
will not be properly installed.
TIP
• Install the fuel hose securely onto the second-
ary injector joint until a distinct "click" is heard.
• To install the fuel hose onto the secondary in-
jector joint, slide the fuel hose connector cover
"1" on the end of the hose in the direction of the
arrow shown.
1
7-8
AIR FILTER CASE