Table of Contents
Advertisement
ADJUSTING THE FRONT SHOCK ABSORBERS (for models equipped
a
b
with two compression damping adjusters)
CHASSIS
EBS00111
ADJUSTING THE FRONT SHOCK
ABSORBERS (for models equipped with
two compression damping adjusters)
_
Always adjust the spring preload, rebound
damping force and compression damping
force of both front shock absorbers to the
same setting. Uneven adjustment can
result in poor handling and loss of stability.
1
1. Adjust:
2
M
a. Elevate the front wheels by placing a suit-
b. Loosen the locknut 1.
c. Turn the adjusting ring 2 in direction a or
c
NOTE:
_
• Be sure to remove all dirt and mud from
• The length of the spring (installed) changes
_
Never attempt to turn the adjusting ring
beyond the maximum or minimum setting.
– 12 –
WARNING
• spring preload
MMM
M MMM
M
M MMM
M
M MMM
M
able stand under the frame.
b.
Spring preload is
Direction a
increased (suspension
is harder).
Spring preload is
Direction b
decreased (suspension
is softer).
Adjusting length c
Standard: 255 mm (10.0 in)
Minimum: 246.5 mm (9.7 in)
Maximum: 261.5 mm (10.3 in)
around the locknut and adjusting ring before
adjustment.
1.5 mm (0.06 in) per turn of the adjuster.
CAUTION:
CHK
ADJ
M MMM
M
M MMM
M
MMM
Advertisement
Table of Contents
