Yamaha R1 Series 2015 Service Manual page 129

1. Throttle cable (accelerator cable)
2. Throttle cable (decelerator cable)
3. Clutch cable
4. Front brake hose
5. Steering damper solenoid lead
6. Clamp
7. Coolant reservoir breather hose
8. Plastic locking tie
9. Radiator stay
10.Damper
11.Radiator bracket
A. Fasten the clutch cable at the positioning
tape and the radiator stay with the plastic
locking tie.
B. Fasten the coolant reservoir breather hose at
the painted section and the clutch cable with
the clamp.
C. Cross the coolant reservoir breather hose so
that it is on the outside of the clutch cable.
D. Point the end of the plastic locking tie out-
ward.
E. Route the coolant reservoir breather hose
between the damper and coolant filler hole.
F. Make sure that the end of the clamp contacts
the radiator bracket as shown in the illustra-
tion.
2-54
CABLE ROUTING