Table of Contents
Advertisement
Quick shifter (if equipped)
The quick shifter allows for full-throttle,
clutch lever-less upshifts. When the
shift switch detects motion in the shift
pedal, engine power and drive torque
are momentarily adjusted to allow the
upshift to occur.
TIP
The quick shifter operates when travel-
ing at least 20 km/h (12 mi/h) with an
engine speed of 2000 r/min or higher,
and only when accelerating. It does not
operate when the clutch lever is pulled.
NOTICE
To prevent drivetrain damage, al-
ways use the clutch lever to shift
when riding at slow speed, when
downshifting, or if the quick shifter
is off.
EAUM4720
CCU (Communication Control
Unit)
This model is equipped with a CCU
that allows your vehicle and smart-
phone to connect using Bluetooth
wireless technology and the MyRide
App.
With this connection, noti cations from
apps, incoming phone calls and
missed calls are signaled to you, and
the battery level of your smartphone is
displayed.
WARNING
ECA26261
Always stop the vehicle before
operating your smartphone.
Never take your hands off the
handlebars while riding.
Always concentrate on riding by
keeping your eyes and mind on
the road.
NOTICE
The Bluetooth connection may not
work in the following situations.
3-1
Special features
In a location exposed to strong
EAUM4710
radio waves or other electro-
magnetic noise.
At facilities nearby that are
emitting strong radio waves (TV
or radio towers, power plants,
broadcasting stations, airports,
etc.).
Pairing the CCU and your smartphone
1. Install the MyRide App on your
smartphone and activate it.
TIP
EWAN0070
The MyRide App can be downloaded
from an App store.
2. Remove
the
(XTZ690/XTZ690-U) (See page
4-22.) or the seat (XTZ690-
B/XTZ690-UB) (See page 4-21.).
3. Pull out the CCU and scan its QR
code with the MyRide App.
ECAN0150
3
rider
seat
Advertisement
Table of Contents
Troubleshooting
