▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Install the front panel.
TIP
Insert projection on the front panel into grommet.
b. Install the quick fastener "3" and bolt "4", and
then tighten the bolt to specification.
Front panel bolt (left)
3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
Front panel bolt (right)
3.5 Nm (0.35 m·kgf, 2.5 ft·lbf)
3
1
4
2
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS31519
REMOVING THE SIDE COVER (left)
1. Remove:
• Front side cowling (left)
2. Remove:
• Side cover (left) "1"
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the side cover bolt "2".
b. Remove the side cover "1" by sliding it rear-
ward.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS31520
INSTALLING THE SIDE COVER (left)
1. Install:
• Side cover (left) "1"
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Install the side cover "1".
TIP
Insert projections "a" on the side cover into slots
"b".
3
1
4
a
b. Install the side cover bolt "2", and then tighten
the bolt to specification.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Install:
• Front side cowling (left)
4-15
GENERAL CHASSIS (2)
2
1
b
a
Side cover bolt
3.8 Nm (0.38 m·kgf, 2.8 ft·lbf)
2
b