Yamaha R1 Series 2015 Service Manual page 316

cable, and handlebar switch leads are routed
properly. Refer to "CABLE ROUTING" on page
2-51.
5. Install:
• Plastic locking tie "1"
TIP
Fasten the front brake hose to the right front fork
leg with the plastic locking tie.
6. Adjust:
• Spring preload
• Rebound damping
• Compression damping
Refer to "ADJUSTING THE PRELOAD OF
THE FRONT FORK LEGS (for YZF-R1M)"
on page 3-24 and "ADJUSTING THE DAMP-
ING FORCE OF THE FRONT FORK LEGS
AND REAR SHOCK ABSORBER ASSEM-
BLY (for YZF-R1M)" on page 3-25.
1
4-99
FRONT FORK (for YZF-R1M)