Removing The Clutch - Yamaha R1 Series 2015 Service Manual

EAS30346

REMOVING THE CLUTCH

1. Remove:
• Clutch cover "1"
• Gasket
TIP
Loosen each bolt 1/4 of a turn at a time, in stag-
es and in a crisscross pattern.
After all of the bolts are fully loosened, remove
them.
2. Remove:
• Compression spring bolts "1"
• Pressure plate 1 "2"
• Compression springs
• Pressure plate 2 "3"
• Pull rod "4"
2
1
3
3. Remove:
• Friction plates 1 "1"
1
4. Remove:
• Clutch plate 1 "1"
• Clutch plates 2
1
1
4
• Friction plates 2
• Clutch damper spring
• Clutch damper spring seat
1
5. Straighten the clutch boss nut rib "a".
a
6. Loosen:
• Clutch boss nut "1"
TIP
• While holding the clutch boss "2" with the uni-
versal clutch holder "3", loosen the clutch boss
nut.
• Do not use an impact wrench for removing the
clutch boss nut.
Universal clutch holder
90890-04086
Universal clutch holder
YM-91042
3
7. Remove:
• Clutch boss nut
• Conical spring washer
• Clutch boss
5-56
CLUTCH
1
2