Windshield assembly bolt
4.0 Nm (0.40 m·kgf, 2.9 ft·lbf)
2
c. Install the rearview mirrors "3" and rearview
mirror nuts, and then tighten the nuts to spec-
ification.
Rearview mirror nut
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
3
d. Connect the turn signal light couplers "4".
4
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Install:
• Front side panel (left)
• Front side panel (right)
Refer to "GENERAL CHASSIS (2)" on page
4-7.
2
EAS31645
CHECKING THE AIR INTAKE DUCT VALVE
1. Check:
• Air intake duct valve operation
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Connect the vacuum/pressure pump gauge
set "1" to the air intake duct valve "2".
b. Check that the air intake duct valve operates
when vacuum pressure is applied to the valve
using the vacuum/pressure pump gauge set.
Faulty
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS31646
CHECKING THE VACUUM LINE
1. Check:
• Hoses
Loose connections
Cracks/damage
2. Check:
• Surge tank
Cracks/damage
3. Check:
• One-way valve
Cracks/damage/faulty
TIP
4
Check that air flows smoothly only in the direc-
tion of the arrow shown in the illustration.
4-22
GENERAL CHASSIS (3)
Vacuum/pressure pump gauge
set
90890-06945
Pressure/ vacuum tester
YB-35956-B
Replace the air intake duct valve.
1
Connect properly.
Replace.
Replace.
Replace.
2