Yamaha R1 Series 2015 Service Manual page 61

Table of Contents

Turn the main switch to "OFF" before dis-

connecting or connecting an electrical com-

Handle electrical components with special

care, and do not subject them to strong

Electrical components are very sensitive to

and can be damaged by static electricity.

Therefore, never touch the terminals and be

sure to keep the contacts clean.

BASIC SERVICE INFORMATION

When resetting the ECU by turning the main

switch to "OFF", be sure to wait approximately

5 seconds before turning the main switch back

• Do not perform angle adjustment of the IMU

and battery box by pinching the washer

and related parts.

• When installing the IMU, apply a thin coat of

silicone grease onto the washer where con-

tacting the IMU grommet.

• When installing the IMU, use only a genuine

bolt and washer, and tighten the bolt to the

specified torque.

• Pay attention not to expose the IMU to

strong shocks, such as striking or drop-

• Do not place any foreign objects in and

around the battery box.

• Do not obstruct breather opening "a" of the

• Do not clean the breather opening and do

not blow it with compressed air.

• When replacing the collar or grommet, re-

place all four collars and grommets.

Troubleshooting