Installing The Engine; Removing The Engine - Yamaha R1 Series 2015 Service Manual

EAS30250

REMOVING THE ENGINE

1. Loosen:
• Engine mounting adjust bolt
TIP
Loosen the engine mounting adjust bolt with the
pivot shaft wrench "1".
Pivot shaft wrench
90890-01485
Frame mount insert wrench
YM-01485
1
EAS30251

INSTALLING THE ENGINE

1. Install:
• Engine mounting adjust bolt "1"
(temporarily tighten)
2. Install:
• Engine
3. Install:
• Engine mounting bolt (rear lower side) "2"
• Engine mounting bolt (rear upper side) "3"
4. Install:
• Engine mounting bolt (left front side) "4"
(temporarily tighten)
5. Install:
• Collar "5"
• Collar "6"
• Engine mounting bolt (right front side) "7"
(temporarily tighten)
6. Tighten:
• Engine mounting adjust bolt "1"
1
TIP
• Tighten the engine mounting adjust bolt to
specification with the pivot shaft wrench.
• Make sure that the flange on the engine
mounting adjust bolt contacts the engine.
Engine mounting adjust bolt
8 Nm (0.8 m·kgf, 5.8 ft·lbf)
Pivot shaft wrench
90890-01485
Frame mount insert wrench
YM-01485
7. Install:
• Engine mounting nut (rear lower side) "8"
• Engine mounting nut (rear upper side) "9"
8. Tighten:
• Engine mounting nut (rear lower side) "8"
Engine mounting nut
56 Nm (5.6 m·kgf, 41 ft·lbf)
9. Tighten:
• Engine mounting nut (rear upper side) "9"
Engine mounting nut
56 Nm (5.6 m·kgf, 41 ft·lbf)
10.Tighten:
• Engine mounting bolt (left front side) "4"
Engine mounting bolt
70 Nm (7.0 m·kgf, 51 ft·lbf)
11.Tighten:
• Engine mounting bolt (right front side) "7"
Engine mounting bolt
70 Nm (7.0 m·kgf, 51 ft·lbf)
5-7
ENGINE REMOVAL