Installing The Gear Position Sensor - Yamaha R1 Series 2015 Service Manual

b
1
EAS31658

INSTALLING THE GEAR POSITION SENSOR

ECA22630
NOTICE
To prevent damage to the gear position sen-
sor, keep magnets (including any pickup tool
with a magnet, magnetized screwdrivers,
etc.) away from the gear position sensor.
1. Install:
• O-ring
New
• Gear position sensor "1"
Gear position sensor bolt
4.0 Nm (0.40 m·kgf, 2.9 ft·lbf)
LOCTITE®
TIP
• Lubricate the O-ring with lithium-soap-based
grease.
• Fit the end "a" of the shift drum assembly into
the opening "b" in the gear position sensor "1".
a
1
a
2
53˚
1
b
5-70
CRANKCASE