Yamaha R1 Series 2015 Service Manual page 147

1. Rider seat
2. Passenger seat
3. Tail/brake light
4. Mudguard assembly
5. License plate light coupler
6. Rear turn signal light coupler
7. Passenger footrest
8. Rear turn signal light lead
9. Tail/brake light bracket
10.EXUP cable 1
11.EXUP cable 2
12.Battery box
A. Connect the license plate light lead. Route
the license plate light lead under the rear turn
signal light coupler.
B. Rear left turn signal light: Connect the black
couplers
Rear right turn signal light: Connect the white
couplers
The rear left turn signal light coupler and rear
right turn signal light coupler may be posi-
tioned in any order.
C. Insert the clamp on the rear turn signal light
lead into the hole in the tail/brake light
bracket. The installation position of the rear
turn signal light leads may be placed in any
order.
D. Make sure that the EXUP cables are routed
to the hook-shaped part of the battery box.
2-72
CABLE ROUTING