Disconnecting The Leads And Hoses - Yamaha R1 Series 2015 Service Manual

Disconnecting the leads and hoses

7
Order
Air filter case
Air filter case duct/Air cut-off valve
Throttle bodies
Thermostat assembly
Shift rod/Drive sprocket
1 Clutch cable
2 Starter motor lead
3 Cylinder identification sensor coupler
4 Ignition coil coupler
5 Coolant temperature sensor coupler
6 Neutral switch connector
7 Stator coil coupler
8 Crankshaft position sensor coupler
9 Oil pressure switch connector
10 Gear position sensor coupler
2
10
9
8
Job/Parts to remove
3.5 Nm (0.35 m kgf, 2.5 ft
•
4
6
5
Q'ty
Refer to "AIR FILTER CASE" on page 7-4.
Refer to "AIR INDUCTION SYSTEM" on
page 7-19.
Refer to "THROTTLE BODIES" on page 7-9.
Refer to "THERMOSTAT" on page 6-6.
Refer to "CHAIN DRIVE" on page 4-116.
1 Disconnect.
1 Disconnect.
1 Disconnect.
4 Disconnect.
1 Disconnect.
1 Disconnect.
1 Disconnect.
1 Disconnect.
1 Disconnect.
1 Disconnect.
5-5
ENGINE REMOVAL
lbf)
•
3
4
7 Nm (0.7 m kgf, 5.1 ft
•
1
Remarks
D D
F W F W
lbf)
•
1