Yamaha R1 Series 2015 Service Manual page 315

bracket pinch bolts.
EWA13680
WARNING
Make sure the brake hoses are routed prop-
erly.
TIP
Align the outer tube with the position "a" as
shown in the illustration.
a
2. Tighten:
• Lower bracket pinch bolts "1" and "2"
Lower bracket pinch bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
TIP
Tighten each bolt to 23 Nm (2.3 m·kgf, 17 ft·lbf)
in the order pinch bolt "1"
pinch bolt "1" pinch bolt "2".
3. Tighten:
• Cap bolt "1"
TIP
Tighten the cap bolt "1" using the front fork cap
bolt wrench "2".
Front fork cap bolt wrench 42mm
90890-01575
YM-01575
Front fork cap bolt (for YZF-R1M)
20 Nm (2.0 m·kgf, 14 ft·lbf)
pinch bolt "2"
1
2
4-98
FRONT FORK (for YZF-R1M)
• Handlebar bolt "3"
Handlebar bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
• Handlebar pinch bolt "4"
Handlebar pinch bolt
32 Nm (3.2 m·kgf, 23 ft·lbf)
• Upper bracket pinch bolt "5"
Upper bracket pinch bolt
26 Nm (2.6 m·kgf, 19 ft·lbf)
4
TIP
When installing the front fork legs, make sure
that the front fork stepping motor couplers are
positioned at the angles shown in the illustration.
10° 10°
4. Check:
• Cable routing
TIP
Make sure the brake hose, throttle cables, clutch
2
1
3
1
5
10° 10°